SHOP ONLINE

CAM09

CAM09

Articulating Sight Extender

Articulating Sight Extender
larger imageMove mouse over the image to magnify
This bracket was made to solve the problem of freeflying headgear having no forehead area.
NZ $150.00 NZ $110.00 Save NZ $40.00 incl GST
Qty.
This bracket was made to solve the problem of freeflying headgear having no forehead area. The problem is that in order to mount a ring sight, you must place it too far away from your eye in order to avoid jamming it into your eye while putting the headgear on.

The articulating clamp allows you to mount a post that is spring loaded and rotates 90 degrees to allow you to move the sight out of the way and put the headgear on. Then rotate the shaft to move the sight back into place. The three contoured feet assures a tight fit on the curved headgear.

Once you have installed the bracket on the headgear and have tested the sighting and fit, you can cut off the extra length of the shaft.

Key features:
  • Kit comes with three nylon mounting mounting screws, and articulating bracket. (The nylon screws have a breakaway function in case of an emergency and should not be replaced by metal screws!)
  • It is the perfect way to add a ring sight to most of today's freefly headgear.
  • The sight mounts to this bracket with a normal swivel clamp.
  • Please Note: This is a 1/4" ringsight bracket and can only be used with 1/4" Swivel Clamps, Schumacher 1/4" Swivel Clamp, Schumacher 1/4" X 6mm Swivel Clamp (This Swivel Clamp is only used if you are coupling it with a 6mm ringsight). Sold separately.

You might also be interested in ...

Cookie Composites Top Mount
NZ $120.00
incl GST
Universal L-Bracket Camera Mount
NZ $140.00 NZ $99.00 Save NZ $41.00 incl GST